SEON Trooper TL4 Guía de usuario Pagina 11

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 84
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 10
Installation
700-0099 R008 1–7
1.6. DVR and Component Installation
1.6.1. DVR Installation
The DVR typically ships with the locking front cover on and the mounting plate and
cable cover off.
To install the TL DVR:
1. Select an appropriate mounting location and orientation, horizontal or vertical. For
the dimensions and location of the mounting holes, see Dimensions, on page 1-6
.
2. Unlock the door lock and remove the front cover from the unit to access the front
panel. Verify there is a hard drive inside the DVR.
3. Determine where the wiring and camera cables will enter the unit: on the left side,
right side or back.
4. Remove the necessary knockout (s) and insert plugs and cable grommets.
5. Use the mounting plate to mark the desired position of the DVR and drill the four
mounting holes.
Figure 1-2
Trooper TL Components
DVR hard drive Door lock
Locking front cover
(reversible)
Mounting plate
Cable cover
Cable grommets
Knockouts
Vista de pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 83 84

Comentarios a estos manuales

Sin comentarios